Click here for larger image.
|
Used Taylor Made R7 Draw Irons
Not actual photo. Condition will vary.
|
|
The new TaylorMade r7 Draw irons are the latest distance innovation from TaylorMade. Engineered with the same Inverted Cone Technology that has made their drivers #1 on Tour, these irons feature Draw Weighted Technology to remove weight from the cavity area at the toe and position the CG back and closer to the heel. An expanded COR zone provides increased yardage, especially on mis-hits. This revolutionary design makes the new r7 Draw irons more forgiving and more workable than ever before. 
Features: - More power and superior ball flight for more distance.
- Draw-Weighted Technology helps square the clubface fast at impact to promote a draw by moving weight from the cavity area at the toe, moving the CG back, and closer to the heel.
- Ultra-deep and wide cavity creates super-low and deep CG for high launch and long carry.
- Wide and cambered sole glides over turf to increase playability from all types of lies.
- Inverted Cone - Higher COR and ball speed on mishits
- Unique dampening web soaks up harsh vibrations.
- Maximum Offset - Makes it easier to square the face at and through impact
- Shaft - TaylorMade T-Step 90 Steel • TaylorMade RE*AX 55 Graphite
- Grip - TaylorMade Arrow Reminder Grip
- Handicap - Mid-High
Draw Weighted Technology
By moving discretionary weight from the toe to the heel, the r7 Draw Irons are easier to square at impact. Dampening Web
Unique dampening web combines the latest materials with advanced construction to reduce harsh vibrations upon impact. TaylorMade r7 draw irons available: - Available sets: #4 through #9 irons, PW: 44°, SW: 54° or #3 through #9 irons, PW: 44°
- Available separately: #3 Iron: 19° • AW: 49° • SW: 54° • LW: 59°
- Graphite and steel shafts available in Senior (graphite only), Regular and Stiff
- Available in right- and left-hand models
| Iron | Loft | Lie | Offset | Graphite | STD Flex | Graphite S/W | Steel | STD Flex | S/W | | | | | | 3 | 19° | 61° | 7.0 mm | 39.00" | S,R,M | D0 | 38.75" | S, R | D1 | | | 4 | 22° | 61.5° | 6.7 mm | 38.50" | S,R,M, | D0 | 37.75" | S, R | D1 | | | 5 | 25° | 62° | 6.3 mm | 38.00" | S,R,M, | D0 | 37.75" | S, R | D1 | | | 6 | 28° | 62.5° | 6.0 mm | 37.50" | S,R,M, | D0 | 37.25" | S, R | D1 | | | 7 | 32° | 63° | 5.7 mm | 37.00" | S,R,M, | D0 | 36.75" | S, R | D1 | | | 8 | 36° | 63.5° | 5.3 mm | 36.50" | S,R,M, | D0 | 36.25" | S, R | D1 | | | 9 | 40° | 64° | 5.0 mm | 36.00" | S,R,M, | D0 | 35.75" | S, R | D1 | | | PW | 44° | 64.5° | 4.7 mm | 35.75" | S,R,M, | D1 | 35.50" | S, R | D2 | | | AW | 49° | 64.5° | 4.7 mm | 35.75" | S,R,M, | D1 | 35.50" | S, R | D2 | | | SW | 54° | 64.5° | 2.0 mm | 35.50" | S,R,M, | D3 | 35.25" | S, R | D4 | | | LW | 59° | 64.5° | 2.0 mm | 35.25" | S,R,M | D4 | 35.00" | S, R | D5 | | "11242006Listed"
|
|
Catalog #:PR1556
|
|
|
|
